|
Disclaimer: In addition to post processors that are included with SURFCAM, there are some post
processors that are provided by third-party resellers. All SURFCAM third-party post processors are designed to enhance
and improve your productivity in SURFCAM. The following third-party SURFCAM post processors are not developed or
controlled by Surfware, Inc. and thus, Surfware, Inc. is not responsiblefor any losses, damages, or changes that these
add-ins may have on your system(s). Any sales or support requests for any third-party SURFCAM post processors are to be
directed to the individual post vendor.
M-POST is a standard post processor program that comes included in SURFCAM and allows users to post their SURFCAM toolpaths
to NC machine controllers. There are over 200 M-POST post processors which also come included in SURFCAM for major CNC machine
manufactures. With M-POST, users can create NC code for EDM, Lathe, 2-axis, or 3-axis machine controls. Examples of some of the
controls that are available to SURFCAM users are Fadal, Haas, Mazak, and Fanuc, just to name a few.
M-POST is an “easy to use” post processor that looks very much like an NC program. Users just simply have to edit their M-POST templates
to look like the NC code they want to see as a result, and then M-POST outputs the NC code to match.
SURFCAM users can also use the M-POST NC code to check their programs or make any necessary changes themselves without having to re-post
the toolpath again. The benefit of this “easy to use” post processor program is the ability for users to make on-the-fly changes in any text
editor or even on the shop floor, resulting in time and cost savings.
|